once again im double posting :S

heres my update picture so far...

let the work... begin!

At 2/26/10 08:27 PM, LegolaSS wrote: let the work... begin!

First things first,
Cover the hammer head in paint,
and bash the raffy a few times.

At 2/26/10 08:27 PM, LegolaSS wrote:

once again im double posting :S

heres my update picture so far...

let the work... begin!

It looks like you are about to torture the poor guy...

At 2/26/10 10:13 PM, DooDooMeaT wrote: It looks like you are about to torture the poor guy...

It's that what you're supposed to do?

At 2/26/10 08:27 PM, LegolaSS wrote:

once again im double posting :S

heres my update picture so far...

let the work... begin!

i see no paints, you are going to torture him aint ya, or mash him into the desk

At 2/26/10 10:21 PM, ashman112 wrote: i see no paints, you are going to torture him aint ya, or mash him into the desk

of course not!... i intend to be nice to my raffy buy ripping his back apart to make a snugger fit for my mindchamber idea... iv already made a hole where his "nose" was to make way for a new head... its going to be able to turn and be removable!!!... *hopefully thats what you were looking for luis :P*

picture update

please note im used to a lot smaller scale... *left side of picture* is what i normal paint... *right side* is the raffy head with my sketchmarks to work out stuff... :D

At 2/27/10 09:45 AM, LegolaSS wrote: of course not!... i intend to be nice to my raffy buy ripping his back apart to make a snugger fit for my mindchamber idea... iv already made a hole where his "nose" was to make way for a new head... its going to be able to turn and be removable!!!... *hopefully thats what you were looking for luis :P*

ok i think its safe to say, this is going to be epic, remember to keep us posted

At 2/27/10 09:45 AM, LegolaSS wrote:

At 2/26/10 10:21 PM, ashman112 wrote:

That's looking Great man, it's gonna be sick when its finished!!

going to attach back part of it... then begin scuplting on it after it has all dried and set... *and while its drying im going to make the head*... im not sure if i want to use see through plastic for the eyes or not yet :S... i dont know if it will work like i want them to :3.... anway... will post more pictures when i get to a milestone or something like that :P...

anyone else have any raffy updates!?

At 2/28/10 01:08 AM, LegolaSS wrote: im not sure if i want to use see through plastic for the eyes or not yet :S... i dont know if it will work like i want them to :3..

Totally make it semi-seethrough... then put a light inside it!

At 2/27/10 09:45 AM, LegolaSS wrote: picture update

How'd you get the head off? From what I could tell it wasn't removable, do you intend to put it back on?

Here is how my raffy is looking...its a shitty blackberry pic

At 2/28/10 07:09 PM, DooDooMeaT wrote: Here is how my raffy is looking...its a shitty blackberry pic

Oh, wow. You actually can pull that off. I'm very impressed and eager to see more progress!

At 2/28/10 06:45 AM, Captain-Ben wrote: How'd you get the head off?

put your hand around the head... and the other around the body... give it a good tug with alot of force untill it pops off... *sounds rude really*

From what I could tell it wasn't removable, do you intend to put it back on?

it is removable... how else are you ment to get the tie on!?... :P...

anway... i have... kinda... put it back on... not in the same place however :P

At 2/28/10 07:09 PM, DooDooMeaT wrote: Here is how my raffy is looking...its a shitty blackberry pic

main point of critique would be that it doesnt resemble the raffy a whole lot anymore.... I dont know how mindchamber feels about that, but I`d rather have the original ears and horns a bit more pronounced.

At 3/1/10 03:32 AM, J-qb wrote:
main point of critique would be that it doesnt resemble the raffy a whole lot anymore.... I dont know how mindchamber feels about that, but I`d rather have the original ears and horns a bit more pronounced.

I understand what you mean. I thought about changing the design beacause I knew that it was no longer going to resemble a raffy. I decided to go with my original aproved concept. I chopped the ears off because my origanal concept didnt have ears.

At 3/1/10 03:16 AM, LegolaSS wrote:

At 2/28/10 06:45 AM, Captain-Ben wrote: How'd you get the head off?

put your hand around the head... and the other around the body... give it a good tug with alot of force untill it pops off... *sounds rude really*

Or bake it so it softens a bit

Mine came in the mail today.

At 2/28/10 07:09 PM, DooDooMeaT wrote: Here is how my raffy is looking...its a shitty blackberry pic

It looks really nice! What kind of clay you usin?

At 3/1/10 07:48 PM, GreyGreySilver wrote:

At 2/28/10 07:09 PM, DooDooMeaT wrote: Here is how my raffy is looking...its a shitty blackberry pic

It looks really nice! What kind of clay you usin?

Thanks! I am using super sculpty.

the operation is complete mr.raffy... how do you feel?...

dont worry... still working on the head... thats just the base to model it onto...

At 3/2/10 06:10 PM, LegolaSS wrote: the operation is complete mr.raffy... how do you feel?...

Woah woah woah!!
Where's his body gone?!
I'd like to see a side elevation photo!

At 3/2/10 06:22 PM, TurkeyOnAStick wrote: Where's his body gone?!
I'd like to see a side elevation photo!

dont worry... its still there

sort off... :P

I'm wondering what I should do with the mouth. Either use the nose-bulb thing as giant teeth, or get rid of the whole bulb thing... that's tricky though since i've never worked with vinyl before.

any tips?

At 3/3/10 02:17 AM, Rutger wrote: I'm wondering what I should do with the mouth. Either use the nose-bulb thing as giant teeth, or get rid of the whole bulb thing... that's tricky though since i've never worked with vinyl before.

any tips?

i would try and keep the figure as intact as possible... the only reason iv heavy changed it was beacuse i was going to something complex and different...

please note the figure is hollow inside so if you did cut the nose part off you would have to repair the hole you made... its much simpler to stick with the model intact!...

At 3/3/10 02:47 AM, LegolaSS wrote: i would try and keep the figure as intact as possible... the only reason iv heavy changed it was beacuse i was going to something complex and different...

please note the figure is hollow inside so if you did cut the nose part off you would have to repair the hole you made... its much simpler to stick with the model intact!...

Ah, I'll just leave it intact then. I was already wondering if it was hollow or not. Thanks!

Sorry for the doublepost.

First work in progress! One tooth disappeared because of the lightning, but it is there.

At 3/3/10 03:13 AM, Otto wrote:

At 2/28/10 07:09 PM, DooDooMeaT wrote: Here is how my raffy is looking...its a shitty blackberry pic

That is really fucking cool, and I reckon it's fine to change the shape a lot. It's be kinda boring if they were just.. plain Raffy shape.

I thought that was the point, then my raffi proposal's would have been more elaborate, with LED's and everything. If i figured i could cut the poor guy in half i would have cut off his legs an given him remote controlled wheels. (yes it would not be hard, would it not)

At 3/3/10 09:35 AM, Catoblesauce wrote: I thought that was the point, then my raffi proposal's would have been more elaborate, with LED's and everything. If i figured i could cut the poor guy in half i would have cut off his legs an given him remote controlled wheels. (yes it would not be hard, would it not)

mabey the rules will be tightened next time around?... im trying to keep the basic raffy structure as intact as i can without losing the mindchamber idea i had... i can see what you meen about making it with bells and whisles galor but my main focus is still on painting the figure...

Gonna start my guy this weekend and next week, but until that time, heres the munny I got last year.

My webcam is really bad now. Not the best pic