Custom Kudamon Digimon Plush

Thank you Orochii for supporting NG!

We're 11 people from our target today. Why don't you be one of them?

You can support NG too and get tons of perks for just $2.99.

Create a Free Account and then..

Become a Supporter!

Custom Kudamon Digimon Plush

Author Comments

Commission: Kudamon from Digimon

It took me months and three full seasons of a show (thanks, Netflix!) to get this commission done. I also had to order a special, 4x6" embroidery hoop for those circuit markings, and I'm so glad I did. It took three separate hoopings per side to get those markings stitched out, and they all had to be lined up very carefully each time so that they turned out symmetrical. Cannot imagine trying to do that on the smaller hoop!

Kudamon measures about 3' in length, and is made from minky fabric. The markings are all machine-embroidered, except for the collar. Those I just did with satin stitches on the manual machine since the area was too big for the embroidery machine (and I couldn't bring myself to keep hooping fabric after those circuit markings!!). The plush is 90% machine-sewn, with the "ear" pieces, claws, and earring sewn on by hand. The tail bell was also attached by hand.

There's polypellets in the middle of the body, right in the bending area. I wanted to give the commissioner the chance to sit the plush down without crushing and warping the stuffing inside. The rest is all polyfill!

Click on an icon to vote on this!

Credits & Info

4.22 / 5.00

Jul 16, 2017 | 11:19 AM EDT
File Info
2048 x 2048 px
756 kb

You might also enjoy...

Licensing Terms

You are free to copy, distribute and transmit this work under the following conditions:

You must give credit to the artist.
You may not use this work for commercial purposes.
No Derivative Works:
You may not alter, transform, or build upon this work.