Polish translation of Johnny Rocketfingers 23.89 / 5.00 2,891 Views
This is a game about the moon that went missing3.64 / 5.00 4,209 Views
Parody Pixel retro game3.56 / 5.00 8,317 Views
At 6/20/11 05:35 PM, SBB wrote: RAGE
Hello buddy. Do you have two hard drives? This tends to happen when your hard drive can't keep up with all the audio streams. There's a few things you can do...
Change the length of your audio regions so that they're not all starting at exactly the same time
Freeze tracks to free up memory
get a second hard drive and keep applications and programs on one and your logic save files on the other (saves the drive head having to quickly scan between loading data for programs and loading data for audio. Will also prolong the length of your drives!) I would say that this will make the biggest change. Terrabyte drives are like £40 at the moment as well so not very expensive.
Increasing your playback buffer will help but will incur latency. Reduce when recording live and increase when mixing.
Consolidate audio tracks. If you're anything like me, you'll end up with thousands of little slices of edited audio on a track in the arrange window. Lots of tracks with miniscule sections of audio hogs your resources and stresses out your hard drive. Highlight all audio sections on a track and bounce as one file and this will greatly help your memory consumption.
Hope this helps.
Sorry for double post. Keep your sample libraries on the 2nd drive too, not just your logic save files. Keep audio files and programs seperate! Also I just noticed from the screen grab underneath your post that it does look like you use lots of cut up audio sections. Highlight them all and glue together (I've set '=' as a shortcut for this) and that will help alot.
... Triple post.. Do I get banned for that?
Anywho. Here's one for you. I have a big MIDI controller keyboard with loads of functions. I'm trying to assign a fader to a control in the EXS24. How do I know which MIDI CTRL number my fader is putting out? trial and error would take ages as there are obviously 128 possible...
You don't really have to know the control #. Just press cmd-L, press learn mode, drag the fader a bit and then turn the software knob you want to assign the fader to. The cmd-L window also gives you detailed information about the fader if you still need that.
At 9/8/11 04:58 PM, SBB wrote: Well technically cmd-K. cmd-L launches straight into learn mode, which is often what you want.
Thanks SBB, I Got there in the end. There's a big friggin' obvious display on the Transport bar. Tells you velocity, note etc. If you use a control it will display the control number. It was #71 in this instance so I just plugged that into the modulation router.
Are you still having problems with the "audio overload" error message or did you manage to sort that out?
Does anyone know if there's a way to set up your command click to default to a specific tool automatically when you start up logic? I use the fade tool more than anything, and now every time I open a new session I automatically command + click expecting the fade tool but noooo. So I was curious if there was a way to have that be the default?
Aside from making a new template..
I KEEP DOUBLE CLICKING OTHER MIDI CLIPS BUT THE MOTHER FUCKING PIANO ROLL WON'T FUCKING CHANGE. IT KEEPS LOADING THE SAME FUCKING CLIP EVEN AFTER I'VE DELETED IT. I CAN'T WORK WITH THE SONG ANYMORE WHAT THE FUUUUUUUUUUUUUUUUUUCK
I have a question..
So lets say you're just trying to do some quick editing. You "shift+command+i" and import an audio file. You do your business and don't need to save it, so you close out the project.
Logic leaves behind an AIF which is the copy of the file you imported (I think).. Is there a way to set a new default path for those? I think if you save the project, it'll default to putting that copy to the audio folder in the project file. Buut I often do quicky editing that doesn't really mandate saving the session.
It's just annoying to have to go through and delete all these extra files that it leaves behind. So I was wondering if it was possible to have it default the save path to like.. the trash can.. or a specified folder. Would be sweet, because I share a dropbox folder with like 4 people, and thats where I keep a bulk of sounds that I made to layer in sfx and whatnot, and every now and then I'll get an IM on skype being like "okay wtf is asdlfjljdfkhsadljf.aif?" and then I'm like "oh shit, my bad. Ignore that while I go delete." it's just messy and I don't like it.
If you know what I'm talking about and know how to do this.. that would be epicness.
At 8/26/10 11:40 PM, Mystery-Moon-Pie-Aud wrote: Is there any way faster than doing each single midi note, in a similar manner to FL Studio where you can just quantize and it cuts the beginning/ends and aligns to grid?
Select all notes> Event> Function > Quantize
At 5/22/13 08:23 AM, ZStriefel wrote: Logic leaves behind an AIF which is the copy of the file you imported (I think).. Is there a way to set a new default path for those? I think if you save the project, it'll default to putting that copy to the audio folder in the project file. Buut I often do quicky editing that doesn't really mandate saving the session.
I'm sure this has a simple solution (I don't know it) but what I do is kind of a roundabout solution to your problem, which is having one project file (with a shortcut on the desktop or wherever easily accessible) where you do all that kind of quick audio file editing. Everything goes neatly into one folder and sorts itself out that way.
At 5/24/13 05:16 PM, Ecke wrote:At 8/26/10 11:40 PM, Mystery-Moon-Pie-Aud wrote: Is there any way faster than doing each single midi note, in a similar manner to FL Studio where you can just quantize and it cuts the beginning/ends and aligns to grid?Select all notes> Event> Function > Quantize
Or, in the piano roll, set the ... don't know what to call it ... scale? As in 1/8 or 1/16, etc. (upper middle of the window.)
You'll have to re-set the the "scale" (or whatever the proper name for it is) every time you quite and re-open the project.
At 5/24/13 08:21 PM, skyood wrote: don't know what to call it ... scale? As in 1/8 or 1/16, etc. (upper middle of the window.)
Personally I often prefer using the window in the top left (when you have selected the MIDI region in question), because it allows you to do quantization non-destructively (the original imperfections are still "available" - you can get them back by turning the quantization off), and lets you apply smaller 'amounts' of quantization (by setting Q-Strength below 100%), quantize velocity, quantize lengths, etc.
At 5/28/13 06:40 PM, Ecke wrote: How do ya'll bounce MP3?
320k, no VBR, real time, overload protection only here.
Use these settings. Why would you want to bounce real time?
At 7/3/09 03:49 PM, nathanallenpinard wrote:At 7/3/09 03:22 PM, gregaaron89 wrote:Well then, I suppose the answer is no to that first question.At 7/3/09 03:16 PM, nathanallenpinard wrote:Wow, I've never looped something this way, I've always just pulled it to loop it. But regardless I checked and it doesn't include the automation when you do that.At 7/3/09 03:13 PM, statueofdiveo wrote: what do you mean "MAY"What else would it mean? I don't know for sure.
When you loop a segment of MIDI by click on the "Loop" checkbox, it might also include the automation, but I do not know for sure.
Btw, you can drag the loop segments to be shorter or longer if you don't want them to loop forever. Go to the bottom edge of the region and it'll turn into a loop icon. Drag to extend or shorten.
(Im probably late, but I think I can answer this....)
Weeeellll...... if you copy and paste a midi region holding automation it also pastes the automation. It's kinda annoying sometimes, but if ya wanna loop automation, that's what you have to do. Or of coarse just copy and paste your automation