Newgrounds.com — Everything, By Everyone.

At 3/2/09 02:23 PM, Elios wrote: At first, i was thinking about putting selective user names on the wall in random spots. BUT, i thought of this. Instead of making it all random and whatever, collect the names that i'm going to add, and shape and design all of them into a pattern similar to the city in the background of the tank.

If that makes any sense to you at all, please, tell me if you approve/have another idea for the names.

That sounds like an awesome idea Elios! Where is this thread for getting names up on the wall you speak of?

At 3/2/09 02:23 PM, Elios wrote:

If that makes any sense to you at all, please, tell me if you approve/have another idea for the names.

I approve this message

At 3/2/09 03:55 PM, fractureboy wrote: That sounds like an awesome idea Elios! Where is this thread for getting names up on the wall you speak of?

It's all on my recent news post!

Eventually i'll make a list of ALL the names going on.

At 3/2/09 03:58 PM, Elios wrote:

At 3/2/09 03:55 PM, fractureboy wrote: That sounds like an awesome idea Elios! Where is this thread for getting names up on the wall you speak of?

It's all on my recent news post!

Eventually i'll make a list of ALL the names going on.

Good job Elios!
It looks awesome, keep it up buddy!.....Could i have my name up there though please???

Again well done!

Ok guys, i got a basic idea of how i'm going to write the names on the wall. Here's an MSpaint sketch of what it'll kinda look like. It's not exact, just a work on progress.

Not sure how i'm going to pull this off, but i figured i'd show you, in case you have something you'd like to add.

At 3/2/09 08:33 PM, Elios wrote: Ok guys, i got a basic idea of how i'm going to write the names on the wall. Here's an MSpaint sketch of what it'll kinda look like. It's not exact, just a work on progress.

Not sure how i'm going to pull this off, but i figured i'd show you, in case you have something you'd like to add.

Do you think you could add my name to the others? :C

Seems like a good layout for the names. Creative.

At 3/2/09 08:33 PM, Elios wrote: Ok guys, i got a basic idea of how i'm going to write the names on the wall. Here's an MSpaint sketch of what it'll kinda look like. It's not exact, just a work on progress.

Not sure how i'm going to pull this off, but i figured i'd show you, in case you have something you'd like to add.

Seeing how that looks you should definitely go through with it, looking at the master picture it looks empty now.

Have the most important people as the biggest definitely.

At 3/2/09 08:33 PM, Elios wrote: Ok guys, i got a basic idea of how i'm going to write the names on the wall. Here's an MSpaint sketch of what it'll kinda look like. It's not exact, just a work on progress.

Not sure how i'm going to pull this off, but i figured i'd show you, in case you have something you'd like to add.

Ah man thats kick ass , thanks for putting my name up. That pic is totally becoming my new desktop :D.

Good luck with finishing the project man!

I'll give each name about the same amount of space (Maybe). Depending on the LENGTH of the name.

For instance, H-K-S will be short, but thick lettering, and speedmetalsandwhich will have long and thin lettering. Basically i just want to fit as many names as possible into a cityscape background.

If anyone can draw up a basic black/white design that i could use, bonus points for ya.

At 3/2/09 08:49 PM, Elios wrote: If anyone can draw up a basic black/white design that i could use, bonus points for ya.

In paint, or like a signature that was scanned?

Amazing. Seriously, Slap my name somewhere. :P

At 3/2/09 08:52 PM, Xinxinix wrote:

At 3/2/09 08:49 PM, Elios wrote: If anyone can draw up a basic black/white design that i could use, bonus points for ya.

In paint, or like a signature that was scanned?

Paint is fine. Eventually i'll get that projector i used again, and i'll see if i can use that for this next project.

Really, all i need is just a simple black on white drawing of something that looks like the city behind the tank.

At 3/2/09 08:54 PM, Elios wrote: Paint is fine. Eventually i'll get that projector i used again, and i'll see if i can use that for this next project.

Really, all i need is just a simple black on white drawing of something that looks like the city behind the tank.

Ahh, alright. Will get it ready soon.

At 3/2/09 08:33 PM, Elios wrote: Ok guys, i got a basic idea of how i'm going to write the names on the wall. Here's an MSpaint sketch of what it'll kinda look like. It's not exact, just a work on progress.

Not sure how i'm going to pull this off, but i figured i'd show you, in case you have something you'd like to add.

If you could add my name, I'd be much obliged, please and thank-you.

At 3/2/09 08:49 PM, Elios wrote: I'll give each name about the same amount of space (Maybe). Depending on the LENGTH of the name.

It really depends on how thin you're going to make the names, and how you're going to put them on the wall, that being the same way you painted the tank with a stencil, or if you're gonna do it by hand. If it's gonna be done with paint, just be wary of drips and whatnot crossing over onto everybody's names.

Other then that, the way you're setting it out so far looks damn sweet.

At 3/2/09 10:44 PM, SpeedMetalSandwich wrote: It really depends on how thin you're going to make the names, and how you're going to put them on the wall, that being the same way you painted the tank with a stencil, or if you're gonna do it by hand. If it's gonna be done with paint, just be wary of drips and whatnot crossing over onto everybody's names.

Other then that, the way you're setting it out so far looks damn sweet.

I don't think i'll be using spray for this project. Due to the amount of detail going into this portion, like you said, i'll have to worry about paint dripping.

I was actually thinking about doing a little bit of painting, and perhaps some home made stamps. Instead of constructing numerous stencils, i'm going to try creating a collection of reusable sponge like stamps.

With this method, i can combine the right letters, pick a size, paint them over, and press it on. This would cut down on time, and i think it's a much cleaner and precise method.

At 3/2/09 08:33 PM, Elios wrote: Ok guys, i got a basic idea of how i'm going to write the names on the wall. Here's an MSpaint sketch of what it'll kinda look like. It's not exact, just a work on progress.

Not sure how i'm going to pull this off, but i figured i'd show you, in case you have something you'd like to add.

Yea, Can I have my name up there also?

This is a great concept.

Elios, sub buddy! you know you wanna add my name

At 3/2/09 08:33 PM, Elios wrote: Ok guys, i got a basic idea of how i'm going to write the names on the wall. Here's an MSpaint sketch of what it'll kinda look like. It's not exact, just a work on progress.

Not sure how i'm going to pull this off, but i figured i'd show you, in case you have something you'd like to add.

That's a great idea, Elios. It would really make the names mesh better with the tank. Also, thanks for adding me.

At 3/2/09 10:51 PM, Elios wrote: With this method, i can combine the right letters, pick a size, paint them over, and press it on. This would cut down on time, and i think it's a much cleaner and precise method.

When you say 'pick a size', do you mean you're going to just cut the sponge out through the letters of the alphabet all in one size, meaning everybody's name will be equally lettered? Regardless, the sponge-stamp idea sounds sweet.

Looking slick Elios. I agree with the whole city idea - that should make it alot better looking. Keep up the good work man!

Please add me Elios!

I'll give you a fishy stick

At 3/2/09 11:26 PM, SpeedMetalSandwich wrote:

At 3/2/09 10:51 PM, Elios wrote: With this method, i can combine the right letters, pick a size, paint them over, and press it on. This would cut down on time, and i think it's a much cleaner and precise method.

When you say 'pick a size', do you mean you're going to just cut the sponge out through the letters of the alphabet all in one size, meaning everybody's name will be equally lettered? Regardless, the sponge-stamp idea sounds sweet.

No not exactly. I think what i'll do is make a series of letters, ranging from 3 inches tall, to less than an inch. This way, i can put some letters together for a name, and then reuse these stamps for another. Not ALL of the names are going to be the same size. That would look silly.

I don't suppose there's any room for a small 'Podburrys'? I like what you've done with this.

Elios, can I please be on your wall of win? :3

I doubt there would be room, but could you attempt to fit my name on please?

At 2/27/09 05:55 PM, Dekuboy wrote:

At 2/27/09 05:50 PM, Elios wrote: This is super serious, and i'm going to be very selective on what names i'm going to put on the wall. Let's make a list of.....hmmm.......20 names.

Ooh! ooh! Pick me!

Can you put my name up there. it will just look cool up there. symbolcymbal. it just rolls off the tongue and onto the wall.. plus i dont think you have many audio artists up there

Scuzzfest wants in. :)
My name would be nice. Congrats by the way, it looks amazing.