Be a Supporter!
Response to: Taking baths. Posted August 20th, 2011 in General

At 8/20/11 01:50 PM, ModernPatriot wrote: I only take showers.

same here

also when you're in a rush in the morning, which is mostly every morning, the last thing you wanna do is hang around for a tub to fill up with water

Response to: The Sketch Collab 2011 Posted August 17th, 2011 in Collaboration

At 8/16/11 08:12 PM, WooleyWorld wrote: Something to keep us all preoccupied for a few seconds.
Tim's worst nightmare...

:L that made me laugh
everyone has a phobia of something you know ;)

Response to: The Sketch Collab 2011 Posted August 16th, 2011 in Collaboration

At 8/16/11 08:38 AM, Yhtomit wrote: Normally, that wouldn't work, but Flash seems to be co-operating with me today and I've been able to do it myself.

Terrific :)
also I apologise for my layer fetish...

Response to: The Sketch Collab 2011 Posted August 16th, 2011 in Collaboration

At 8/15/11 06:10 PM, Yhtomit wrote: Uh... fred, is there any way you can reduce the number of layers in your part, and preferabley make it work without masking layers? Because those are seriously annoying to work out how to transfer, and work out what they even do.

tell you what, do you want me to put them in a movieclip on a single layer? that would probably be easiest

Response to: The Sketch Collab 2011 Posted August 1st, 2011 in Collaboration

At 8/1/11 05:36 AM, Yhtomit wrote: Can someone help out and convert Sacros' part down to FL8?

Tada

Response to: The Sketch Collab 2011 Posted July 29th, 2011 in Collaboration

I like the 'Lullaby De Amor' one :)

Response to: The Sketch Collab 2011 Posted July 15th, 2011 in Collaboration

heres mah pic
BOO

Response to: The Sketch Collab 2011 Posted July 3rd, 2011 in Collaboration

At 7/3/11 12:12 PM, Yhtomit wrote:
At 7/3/11 10:24 AM, fredstermaster wrote: Jamieneo66's Flash 8 .FLA
Zeebrafication's Flash 8 .FLA
Thanks for those, but are you sure these two are converted properly? I got the Unexpected File Type error that I get with CS3 FLA's. Are those two definitely FL8's?

Ok, operator error, my bad, they were still in CS3 format *facepalm*
Try these:
Jamieneo66
Zeebrafication

Response to: The Sketch Collab 2011 Posted July 3rd, 2011 in Collaboration

At 7/3/11 12:12 PM, Yhtomit wrote:
At 7/3/11 10:24 AM, fredstermaster wrote: Jamieneo66's Flash 8 .FLA
Zeebrafication's Flash 8 .FLA
Thanks for those, but are you sure these two are converted properly? I got the Unexpected File Type error that I get with CS3 FLA's. Are those two definitely FL8's?

Hmmm, let me investigate.. will report back!

Response to: The Sketch Collab 2011 Posted July 3rd, 2011 in Collaboration

Kembry's Flash 8 .FLA
SnowBanger's Flash 8 .FLA
Jamieneo66's Flash 8 .FLA
Zeebrafication's Flash 8 .FLA

i'm away for 10 days from tommorow, but i'll try to check up on this later today to convert any more fla's posted since this

Response to: The Sketch Collab 2011 Posted July 3rd, 2011 in Collaboration

At 7/3/11 05:07 AM, MihaP wrote: Plzz, help!!!! I need someone to convert my CS4 fla file to CS3.
http://www.newgrounds.com/dump/item/ea77 fd23ca86a9b5b65755ac8d4d2946
heres the link.
Thanks for listening!!!!!!!!!!!!!!pls help:,(

Might as well just convert it down to flash 8 as well since i'm doin this ;)
MihaP's Flash 8 FLA

Response to: The Sketch Collab 2011 Posted July 3rd, 2011 in Collaboration

At 7/3/11 05:07 AM, MihaP wrote: Plzz, help!!!! I need someone to convert my CS4 fla file to CS3.
http://www.newgrounds.com/dump/item/ea77 fd23ca86a9b5b65755ac8d4d2946
heres the link.
Thanks for listening!!!!!!!!!!!!!!pls help

FREDSTERMASTER TO THE RESCUE

Response to: The Sketch Collab 2011 Posted May 22nd, 2011 in Collaboration

sounds like you have this collab business down to a fine art!

Response to: The Sketch Collab 2011 Posted May 21st, 2011 in Collaboration

Just because i got raptured and am posting from this heaven, doesnt mean someone is going to take my place right? I JKS.
Yhtomit are we still on track for release early july?
I am rather looking foward to seeing this in the portal :)

Response to: The Sketch Collab 2011 Posted May 14th, 2011 in Collaboration

*slight gust of wind*

The Sketch Collab 2011

Response to: The Sketch Collab 2011 Posted May 10th, 2011 in Collaboration

At 5/10/11 11:42 AM, Elfman-Rox wrote: You can actually do it within flash.
Just file > import > import to library > (select the swf file)
Then you can get the whole swf in a movieclip, compressed, of course. Copy and paste the frames out of the mc and into the timeline.

I am not part of this collab

You clever muffin!

Response to: The Sketch Collab 2011 Posted May 10th, 2011 in Collaboration

At 5/9/11 02:17 AM, SteakandKidneyPie wrote:
Ouch, that must suck. Well, I think you can recover the part. There is some swf to fla software out there that you'll probably be able to use. I remember, on The Dead End Collab I did, my brother's part got fucked up, so I downloaded a trial version of some swf to fla program, and got it back in use for the collab.
Have a go at that, see if that works.
I will give that a go, thank you.

I used the trial of this program in a collab i ran last year, did the trick. there are a few others on cnet if this one doesnt work for you aswell

Response to: The Sketch Collab 2011 Posted April 18th, 2011 in Collaboration

At 4/18/11 02:40 PM, Airfaerie95 wrote: gah I'm sorryyyyyyy. I'm alive. I'm still on board. -_-
No need to make excuses, although my tablet did end up being unusable for about a month.
(I just got a new one this week actually....)

preview (mostly done. not quite): http://www.newgrounds.com/dump/item/a93b ad9d8525fc6e0f413b07b75ad31c

cooooooooool

Response to: The Sketch Collab 2011 Posted April 11th, 2011 in Collaboration

At 4/10/11 03:20 PM, SoniProductions wrote: Yhtomit, you can count with me in the collab!

Sorry buddy, there's a waiting list for parts in this collab since it's full. You aren't gaurenteed a place but you can join the end of the queue if you want

Response to: The Sketch Collab 2011 Posted April 9th, 2011 in Collaboration

At 4/9/11 03:27 AM, Yhtomit wrote: I'm going on holiday now. Keep working on your parts, and keep an eye out for the people on the chopping block, see if they post.

I'll be back Thursday. You guys can look after things til then.

Yesir.
I am expecting a postcard!

Response to: The Sketch Collab 2011 Posted April 4th, 2011 in Collaboration

At 4/4/11 02:50 AM, Yhtomit wrote: The people on that list have two weeks to post here, preferably with some kind of update on their part. But if it gets to 18/4/11, and there's still nothing from them, then I'm sorry, but there are 14 people in the queue, and it's about time we got some of them moved up.

thats a good plan. it's unfair for them to hog a place in the collab and then not contribute anything

Response to: The Sketch Collab 2011 Posted March 26th, 2011 in Collaboration

At 3/25/11 08:44 PM, Sacros wrote: OMG you are right, my sincere apologies to you burntfox, dunno why i thought that

cant shake the feeling someone bypassed the line though, dunno why, oh well, just felt like sharing the feeling, its not like watching the spots is my job, thats mrs. CO responsability so if youll excuse me, ill fuck off

*backflips*

That was fun to read

Response to: Movies that mindfuck? Posted March 23rd, 2011 in General

American psycho
its also hilarious..
..in a sick way

Response to: The Sketch Collab 2011 Posted March 13th, 2011 in Collaboration

yea i think we did that last year and it turned out pretty good

Response to: The Sketch Collab 2011 Posted February 28th, 2011 in Collaboration

Kembry you are insane lol

Response to: The Sketch Collab 2011 Posted February 27th, 2011 in Collaboration

At 2/26/11 10:38 PM, Sacros wrote:

maybe we could have some sort of bios page where clicking on a name would take you to that animation

I think that's what WooleyWorld is suggesting, not a jump to next animation button

Response to: The Sketch Collab 2011 Posted February 26th, 2011 in Collaboration

At 2/25/11 06:50 PM, WooleyWorld wrote: I think it would be nice at the end of the collab, definately not at before the whole thing plays.
So that people can see the whole thing then jump back to what they want to see again.
Nice little touch I think, but it's your world, boss. Haha.

I think it's a spiffing Idea if you could pull it off

Response to: The Sketch Collab 2011 Posted February 7th, 2011 in Collaboration

At 2/5/11 11:13 PM, XiaoxiaoGOD wrote: Im guessing it would be too late for me to get in on this collab

You guessed correct. HOWEVER if you get on the waiting list now and enough people drop out, or don't stay active on this thread, then there is a chance!

just don't hold your breath

Response to: The Sketch Collab 2011 Posted February 1st, 2011 in Collaboration

At 1/29/11 11:15 AM, Kembry wrote: WOW, good job guys, I like most of the parts, and I can see that people have put much work in their movies.
Im kind a stuck with my movie, because I cannot figure out what to make after one motion. And by the way about layers, sorry I used many layers.
And I hope there is still some small free spot for me.
I HOPE SO...

Im gone show my part soon.

I am guilty of using quite a few layers too. if you get a spot just put your layers in a single moveclip so it's easier for yhtomit to manage

Response to: The Sketch Collab 2011 Posted January 17th, 2011 in Collaboration

@Yhtomit I don't have much free time now to do anymore, so i'm gona say my part's finished if thats k :)